How to Add Brake Fluid in a Toyota Corolla

Adding brake fluid to your Toyota Corolla may be necessary if you have replaced a component in the brake system, such as a caliper or master cylinder, because the fluid would have leaked during replacement. Another reason you would have to add brake fluid is if you are performing a brake bleed to flush out the old fluid. Always make sure you keep a sufficient amount of brake fluid in the master cylinder so that air doesn't enter the system.

Difficulty:

Moderately Easy

Instructions

things you'll need:

• Brake Fluid

1. • 1

     Open the hood and prop it up.

   • 2

     Twist or open the cap off of the brake master cylinder. The master cylinder is usually located on the driver's-side firewall.

   • 3

     Pour brake fluid into master cylinder, up to the "max" line.

   • 4

     Replace the cap onto the brake master cylinder. Pump the brake pedal in your car a few times to remove any air in the brake system.

   • 5

     Close the hood.

Tips & Warnings

• Make sure not to overfill the master cylinder as this will cause braking issues.

• Spilling brake fluid on the paint will damage it.

• Wear safety glasses when working on your Toyota Corolla.